Wanted Yamaha TZ250 rolling chassis
by Unnar (Started July 30 2010,11:10)
Thanks, I have sent him pm but it looks like he doesn't have complete rolling chassis left [ View Post | Print Thread | Read more... ]

AIM my-chron lap timer
by RS Addict (Started July 30 2010,4:33)
Keen on this as I'm restoring an older bike......

Is it a data logger (Temp,revs etc) or just a lap timer only?

Cheers,

(Response #1 of this topic) comments
[ View Post | Print Thread | Read more... ]

USGPRU race at Thunderhill with Vince
by Shoot (Started July 31 2010,7:00)
Ah! Vince, what happened to your machine?
Nice to see you. Put a face to the poster.
I'm starting to get a handle on my 250 so I should get to a race on the 1st wee....
(Response #1 of this topic) comments
[ View Post | Print Thread | Read more... ]

What Tires Do You Run?
by anand (Started July 17 2002,1:08)
if i use the dunlop pressure recommendation i'm destroying my tyres.
only if i back down the pressure untill 24 or 23 psi cold she stays ok.
i am talking rear tyres onl....
(Response #46 of this topic) comments
[ View Post | Print Thread | Read more... ]

Email Server Issues
by Georgie (Started June 23 2010,6:36)
Vince, you are correct, I have the same issue with Comcast where I live. Last year they blocked port 25 saying it's for spam control reasons. I found port 26 to be the best a....
(Response #8 of this topic) comments
[ View Post | Print Thread | Read more... ]

Wanted Honda RS125
by Unnar (Started July 30 2010,11:06)
I'm looking to buy Honda RS125

I prefer mostly stock +2004 models

Regards,

Unnar Már
dynojet@dynojet.is
+35....
(No responses yet) comments
[ View Post | Print Thread | Read more... ]

Rear Dymags
by Keno (Started Feb. 16 2010,8:55)
Pm'd you
(Response #4 of this topic) comments
[ View Post | Print Thread | Read more... ]

Piston damage!
by Tek Shop (Started July 26 2010,11:40)
That doesnt look like debris, it looks like the piston has just let go. Detonation can start it and then then crown just falls apart...Imperfect piston made from an imperfect pro....
(Response #17 of this topic) comments
[ View Post | Print Thread | Read more... ]

WARNING! SCAM EMAIL BEING SENT
by Mike (Started July 29 2010,7:24)
A phishing/scam email is being sent out, please DO NOT OPEN OR RUN ANY ATTACHMENTS ... DELETE ANY SUCH EMAIL IMMEDIATELY!

The email is as follows:


"Subject....
(No responses yet) comments
[ View Post | Print Thread | Read more... ]

Poor pulling at 8500 to 10000rpm
by RS Addict (Started June 27 2010,9:15)
Dear me, I'll have to get my old slide rule out  [ View Post | Print Thread | Read more... ]